Ondulin: an excellent solution for the roof of a country house or summer cottage
Ondulin is a popular corrugated sheet for roofing, similar to slate and measuring 200x95x0.3 cm.
It is made from compressed cellulose fibre impregnated with bitumen and coated with resin with minerals on top. The material is lightweight. With its help, new roofs are removed, and reconstruction of the old coating is carried out. Installation of the roof with ondulin, having studied the technology of work, can be done independently without the involvement of specialists.
Pros and cons of ondulin. Ondulin - price, quality, ease of installation in the Moscow region and the Moscow region
Of the advantages of ondulin, they note:
- lightweight;
- easy installation that does not require special tools;
- calmly tolerates temperature drops and precipitation;
- if the installation is done correctly, then the ondulin roof can serve for at least 50 years.
Among the shortcomings are noted:
- due to the high flammability, special attention is required when arranging the chimney;
- on roofs with a slight slope, due to the rough surface of ondulin, snow lingers;
- flexibility is lost and fragility of sheets appears at low subzero temperatures;
- there is a fear of deformation of the roof under the influence of prolonged rainfall or the scorching sun;
- obligatory installation of continuous sheathing on roofs with a small slope.
Preparation of the frame before the installation of ondulin in Moscow.
Due to its flexibility, installing ondulin on curved roofs or structures with many slopes is possible. Moreover, the technical work is the same for any surface. Before starting work with ondulin, it is necessary to perform a lathing taking into account the roof's slope. When tilted at 5-15 degrees. The top is exposed to rainfall. It is necessary to make a continuous crate under the roof (OSB, chipboard, plywood, boards). For moisture resistance and tightness, ondulin sheets are overlapped (2 waves and 30 cm vertically). Before installation, the functional area and the required amount of roofing material are calculated. Discharged board (45 cm step) lathing is suitable for a slope of 10-15 degrees. Ondulin is mounted with an overlap (1 wave and 20 cm vertically). For a pitch of more than 15 grams, a plank (60 cm step) lathing is suitable.
Laying ondulin. Professional installation of euro slate in the Moscow region and the Moscow region
The first step is to mark the sheets with a coloured pencil; for drawing on the waves, using a piece online as a ruler is recommended. The next step is trimming the sheets. It is carried out with a simple hacksaw for woodworking. To prevent the hacksaw from getting stuck, online is lubricated with oil. The installation of the sheets should begin from the leeward side from the bottom row with a whole sheet. The second row starts with a sheet cut in half to mount fewer overlapping sheets at the side joints. A rope is used to guide the parallel of the cornice.
Comments
Post a Comment