We change the slate roof to corrugated board in United State
Decking Instead of Slate - Laying Process
If you want or need to replace the old roofing material with a lighter and more modern one, it is not at all necessary to order the services of a construction team, since these works can be easily done with your own hands. To change the look of the roof, it is best to use metal tiles. To do this, you need to follow certain requirements and instructions for its installation.
Preparation
Dismantling the slate is performed in the same order as its installation. First, you need to remove the skate, the top row of the slate, and go to the crate. The slate descends along with the guides to the ground, followed by the dismantling of the crate. All processes can be divided into successive stages, performing work on different roof slopes separately.
Slings
Slate and corrugated boards have different requirements for the roof. So, for laying a corrugated board, you need to ensure perfect evenness. In the corners of the slopes, you need to screw in the screws and pull the lacing to check the surface. If necessary, the rafters are hemmed with an edged board to strengthen the entire structure.
Lathing
Further, on top of the rafters, horizontally, you need to lay a waterproofing membrane. All work must be started from the bottom, gradually moving up to the ridge. It is not necessary to stretch the waterproofing very tightly, the joints should overlap, and it should sag a little.
To complete the lathing, a support bar is started to be attached to the ridge over the waterproofing. When all the work is done, a wind board can be installed on the ramps. Installation is carried out to the end of the finished sheathing, making a small protrusion relative to the corrugated board used.
Installation
The size of the material must exactly match the dimensions of the slope. This is the distance to the ridge from the end of the lines, with a margin of 7 cm. Sheets of the corrugated board must be removed from the pack since the polymer coating is sensitive to all kinds of damage.
You can get a modern and beautiful roof covering simply by replacing the slate with metal tiles.
The company "Roof in NYC" in a short time will perform work on replacing your old slate roof with metal tiles. We already have more than 500 roofs in the NYC region behind us, satisfied customers, and good reviews about our work - make us the best in the field of roofing work in the NYC region and the NYC region.
http://www.bizvotes.com/ny/new-york/roofing/noah-builders-nyc-general-contractor-nyc-1264897.html
http://new-york.bizhwy.com/businesses.php?c=476
https://ewire.com/business/united-states/ny/new-york/roofing-contractors-nyc-3/
https://www.cylex.us.com/company/noah-builders-nyc-general-contractor-nyc-33588566.html
https://www.sitelinks.info/noahbuildersnyc.com/
https://couponsale.in/search/httpsnoahbuildersnyccomroofing-contractors
http://www.fail.ch/index.php?article26/guinness-au-zoo/#c1621513462-1
http://izonkouru.org/cecommssa/index.php?article1/premier-article#c1621515355-1
http://portail.luniel.fr/index.php?article11/liste-logiciels/#c1621515544-1
http://roofingcontractorsnyc.xzblogs.com/42322513/finding-expert-roofing-contractors-in-new-york
https://www.articlepole.com/?p=39483&preview=true
https://bestroofingconsrract.blogspot.com/2021/05/how-to-choose-construction-contractor.html
Comments
Post a Comment